Complex Permittivity Spectra of Granular Polymer Composites with Dispersed Ag-Coated Cu Flakes

Abstract Conductive particle-containing granular composites with tuneable negative permittivity are being studied to improve the performance of electromagnetic devices, such as shielding materials. In this study, we investigated the relative complex permittivity and electrical conductivity of granular composites of polyphenylene sulfide (PPS) resin and Ag-coated Cu flakes in the radio- to microwave-frequency range and compared them with those of PPS/bare Cu flake composites. Electrical conductivity measurements revealed that the PPS/Ag-coated Cu flake composites have a lower percolation threshold ( φ c ) than the PPS/bare Cu flake composites, whereas the electrical conductivity of the PPS/Ag-coated Cu flake composites in the percolated particle state was higher at the same particle volume fraction. At particle contents above φ c , a low-frequency plasmonic state of conduction electrons was achieved in the percolated particle chains in both composites, and negative permittivity spectra were obtained. The percolated PPS/Ag-coated Cu flake composites had a negative permittivity up to a higher frequency than the percolated PPS/bare Cu flake composites. Furthermore, the Drude model was used to analyze the negative permittivity spectra of the composites in the percolated particle state. The plasma frequency of the composites with percolated Ag-coated Cu flakes was higher than that of the composites with percolated bare Cu flakes. Thus, coating Ag on Cu particles improved the conductivity of the composite, leading to negative permittivity up to higher frequencies. This study contributes to the enhancement of the negative permittivity achieved by granular composites, which is useful for microwave technology applications. Graphical Abstract