Synergistic adsorption–photocatalytic degradation of the emerging contaminant hydroxybenzotriazole by a 3D sponge-like easy separation polypyrrole/TiO2 composite

Abstract Herein, a 3D sponge-like polypyrrole/TiO 2 (Ppy-TiO 2 ) composite aerogel was developed for the first time to remove hydroxybenzotriazole (HOBt) from water. Mesoporous TiO 2 was prepared via a sol–gel method, and then the Ppy-TiO 2 composite hydrogel was prepared by oxidative polymerization and converted to aerogel by freeze-drying. The morphological, compositional, and surface characteristics of the prepared materials were detailly characterized. The characterization studies revealed that pure anatase mesoporous TiO 2 nanoparticles were successfully prepared and incorporated into amorphous 3D Ppy with a porous chain-like network structure. Coupling Ppy and TiO 2 extended the light absorption to the visible region and decreased the electron/hole recombination rate. The performance studies revealed that the Ppy-TiO 2 composite has higher adsorption and photocatalytic activities than the sum of the individual components. Optimum performance was obtained at pH 5.3 using 0.25 g/L of the Ppy-TiO 2 composite with a Ppy: TiO 2 mass ratio of 1:1. The intermolecular hydrogen bonding was pivotal in the adsorption process which was multilayer. The degradation of HOBt occurs primarily by holes, then superoxide anion radicals. The total organic carbon (TOC) analysis showed a 90% reduction in carbon content after 30 min of treatment. The toxicity study indicated that the photocatalytic process decreased the toxicity of the HOBt solution. The synergism between adsorption and photocatalysis, easy separation, and reusability promote the application of Ppy-TiO 2 composite aerogel for water treatment.