Experimental and FE Investigation on the Influence of Impact Load on the Moment Transmission of Smooth Shaft–Hub Connections

A well-known phenomenon in machinery systems is the easing of a blocked connection of mechanical parts after an impact hit close to the connection. Such impact hits may also arise in shaft–hub connections such as gears, crankshafts, or other parts. The objective of this study is to investigate the influence of local impact loads on the transmittable torque of smooth shaft–hub connections. In a specially designed test rig, it was demonstrated that the transmittable torque of the shaft–hub connection is reduced as a consequence of the impact, resulting in a reduction in the frictional force and slippage of the hub. Increasing the impact load leads to an increase in the reduction in the frictional force as well as the slippage and reduces the transmittable torque. By carrying out a modal analysis of the relevant parts and FE simulations of the impact, two possible reasons have been identified: (i) the impact load excites a vibration mode in the connection which reduces the frictional force and the transmittable torque; and (ii) the impact causes local deformation of the shaft, which results in local slip.