Accurate measurements of delayed neutron data for reactor applications: methodology and application to 235U(nth,f)

Abstract Large inconsistencies still exist in nuclear data libraries regarding the kinetic parameters of delayed neutron (DN) precursors. As an example, there is a 17% gap between ENDF-B/VIII.0 and JEFF-3.3 on the average lifetime T 1/2 of DN precursors from thermal fission of 235 U. This parameter is of major importance for reactivity predictions of nuclear reactors in nominal or accidental configurations. In this context, CEA is actively participating to the ALDEN project (Average number and Lifetime of DElayed Neutrons) which aims at providing the nuclear data community with new data sets of DN from thermal and fast neutron induced fission of various actinides. A dedicated experimental setup was designed and optimized for that purpose and is presented in this paper. It consists of a “long counter” detector containing 16 proportional counters filled with 3 He, embedded in a high density polyethylene matrix. The detector surrounds a fissile target prepared in the form of a miniature fission chamber, containing a few hundreds of micro-grams of fissile material. This set-up is connected to fast and efficient neutron shutters that can produce step-irradiations of variable durations. The equations driving the DN counting following step-irradiations of the fissile target are established and discussed in the perspective of DN yield or group parameter measurement. A comprehensive analysis of the different steps of data reduction is detailed: dead time characterization, Region of Interest (ROI) determination, absolute and relative efficiency calibration, fission rate estimation, irradiation time and background determination, DN decay curve production and physical parameter fitting. Following a prototype experiment performed in 2018 at the PF1b cold neutron beam line of Institute Laue Langevin (ILL, Grenoble, France), we discuss here the analysis of two campaigns occurring in 2019 and 2021 in which significant improvements were achieved in terms of background minimization, counting statistics and fission rate determination. The achievements of this work are the measurement of the delayed neutron emission per fission for the thermal neutron induced fission of 235 U, estimated at (1.625 ± 0.010) % and the group parameters leading to an estimated lifetime of $${T}_{1/2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mi>T</mml:mi> <mml:mrow> <mml:mn>1</mml:mn> <mml:mo>/</mml:mo> <mml:mn>2</mml:mn> </mml:mrow> </mml:msub> </mml:math> = (8.87 ± 0.10) s. Those results are consistent with the values recommended by the IAEA/CRP work and they come with reduced uncertainties compared with previously published results.