Numerical simulation of co-firing LRC and ammonia in Pangkalan Susu 3 & 4 coal-fired steam power plant (CFSPP) capacity 210 megawatts

The effort to reduce CO 2 and NO x emissions plays a crucial role in mitigating climate change, improving air quality, complying with environmental regulations, and promoting clean technology innovation. Ammonia, as an emission-free fuel, shows significant potential as a co-firing agent with Coal in coal-fired steam power plants (CFSPP). Previous studies have demonstrated promising results in emission reduction through ammonia co-firing. This research presents a numerical analysis based on Computational Fluid Dynamics (CFD) to investigate the co-firing of ammonia with low-calorific Coal (LRC) in the CFSPP Pangkalan Susu Units 3 and 4, with a capacity of 210 MW. The study employs fluid flow modelling and chemical reaction analysis using the Discrete Phase Model (DPM) to provide accurate predictions of temperature distribution and pollutant concentrations in pulverized coal boilers. Cofiring simulations were conducted with ammonia additions of 5 % and 15 % on a calorific basis. Injection experiments from each burner (A-D) were performed to identify the optimal injection location. The simulation results indicate changes in combustion characteristics, particularly in temperature distribution. The main finding reveals a temperature decrease when ammonia is added as a co-firing material, attributed to the higher H 2 O content, which leads to increased moisture losses. In terms of efficiency, co-firing showed a decline compared to the baseline combustion of 100 % LRC coal due to the more significant moisture losses. The highest reduction in CO 2 emissions was observed when 15 % ammonia was injected from burner B in case #6, with a mass fraction value of 0.171 at the boiler outlet. Similarly, the most significant reduction in NO x emissions occurred with a 15 % ammonia co-firing from burner B, yielding a mass fraction value of 8.81E-04 at the boiler outlet. This co-firing technology is expected to enhance decarbonization efforts and optimize the use of renewable energy in the future.

Authors

Institutions

Publication Details

Journal
Case Studies in Thermal Engineering
Published
2024-10-03
DOI
https://doi.org/10.1016/j.csite.2024.105230
Citations
8
Primary Topic
Graphite, nuclear technology, radiation studies
Type
article
Field-Weighted Citation Impact
0.94
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Numerical simulation of co-firing LRC and ammonia in Pangkalan Susu 3 & 4 coal-fired steam power plant (CFSPP) capacity 210 megawatts

Hariana Hariana, Prabowo Prabowo, Tri Vicca Kusumadewi, Siew Hwa Chan et al.
8 citations
Case Studies in Thermal Engineering
Graphite, nuclear technology, radiation studies
0.94
article

Numerical simulation of co-firing LRC and ammonia in Pangkalan Susu 3 & 4 coal-fired steam power plant (CFSPP) capacity 210 megawatts

Hariana Hariana, Prabowo Prabowo, Tri Vicca Kusumadewi, Siew Hwa Chan, Teddy Dahlan Manurung, Aditya Eka Yuliadi, Giri Nurgroho, I Nyoman Agus Adi Saputra
article en
8 citations

Abstract

The effort to reduce CO 2 and NO x emissions plays a crucial role in mitigating climate change, improving air quality, complying with environmental regulations, and promoting clean technology innovation. Ammonia, as an emission-free fuel, shows significant potential as a co-firing agent with Coal in coal-fired steam power plants (CFSPP). Previous studies have demonstrated promising results in emission reduction through ammonia co-firing. This research presents a numerical analysis based on Computational Fluid Dynamics (CFD) to investigate the co-firing of ammonia with low-calorific Coal (LRC) in the CFSPP Pangkalan Susu Units 3 and 4, with a capacity of 210 MW. The study employs fluid flow modelling and chemical reaction analysis using the Discrete Phase Model (DPM) to provide accurate predictions of temperature distribution and pollutant concentrations in pulverized coal boilers. Cofiring simulations were conducted with ammonia additions of 5 % and 15 % on a calorific basis. Injection experiments from each burner (A-D) were performed to identify the optimal injection location. The simulation results indicate changes in combustion characteristics, particularly in temperature distribution. The main finding reveals a temperature decrease when ammonia is added as a co-firing material, attributed to the higher H 2 O content, which leads to increased moisture losses. In terms of efficiency, co-firing showed a decline compared to the baseline combustion of 100 % LRC coal due to the more significant moisture losses. The highest reduction in CO 2 emissions was observed when 15 % ammonia was injected from burner B in case #6, with a mass fraction value of 0.171 at the boiler outlet. Similarly, the most significant reduction in NO x emissions occurred with a 15 % ammonia co-firing from burner B, yielding a mass fraction value of 8.81E-04 at the boiler outlet. This co-firing technology is expected to enhance decarbonization efforts and optimize the use of renewable energy in the future.

Case Studies in Thermal EngineeringVol. 63
Sepuluh Nopember Institute of Technology (ID), Nanyang Technological University (SG), Shanghai Electric (China) (CN), National Nuclear Energy Agency of Indonesia (ID)
Openalex Percentile: Top 23%
Graphite, nuclear technology, radiation studies
0.94
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.