Integration of 2D and 3D electrical resistivity tomography and 2D gravity modeling to evaluate groundwater investigations in the Burka Uke catchment area, western Ethiopia

The increasing demand for water resources due to the expanding infrastructure and growing population of Uke town, West Ethiopia, necessitates a comprehensive understanding of groundwater potential within the Burka Uke catchment. The aims and objectives of this study are to identify a map of the aquifer by characterizing the subsurface earth, basement rock depth, resistivity and density of geological layers, their thicknesses, and structural features. The investigation integrates electrical resistivity tomography and gravity modeling to delineate potential groundwater zones and their structural controls. Electrical resistivity tomography profiles (1, 4, and 6) revealed low resistivity zones indicative of potential aquifers. The significant resistivity contrast (378 to 1412 Ω.m) suggests a high fracture density, potentially enhancing groundwater storage. The Bouguer gravity anomaly map, separated into regional and residual components, displayed values ranging from 51.79 to 41.59 mGal, highlighting density variations in the subsurface. As a result, analysis of the residual gravity anomaly map identifies north–south striking fault elements, indicating their influence on groundwater flow. The combined 2D and 3D ERT data also revealed a 2D gravity model of the aquifer from which the concentration extended throughout the study area. Data validation with previously drilled wells has confirmed the effectiveness of the geophysical methods used in identifying potential groundwater zones. This study provided critical information for the sustainable management of existing groundwater and demonstrated the effectiveness of integrating geophysical techniques to delineate and characterize aquifers in water-stressed areas.