Preparation of Tung Oil-Modified Raw Lacquer Films and Application for Mechanical Carving Technique

Raw lacquer, known for its superior performance as a natural liquid coating, boasts excellent physical and mechanical properties as well as durability, making it widely used in manufacturing. However, the high hardness of the lacquer film upon complete curing poses challenges for carving and mechanical engraving. Therefore, it is necessary to study the curing process of lacquer films to obtain films suitable for carving or mechanical engraving. This study involves the preparation of raw lacquer with varying amounts of tung oil added, followed by the measurement of film drying time, surface roughness, glossiness, hardness, and adhesion on substrates to determine the optimal drying conditions. Additionally, SEM analysis of the carved surfaces and FT-IR analysis were used to investigate the impact of tung oil addition on lacquer carving performance and its variation. The results indicate that tung oil, to a certain extent, contributes to a smoother lacquer film but adversely affects film hardness and adhesion to Prunus serotina. However, with an increase in the amount of refined tung oil to 15%, the film exhibits improved glossiness, smoother carving tool marks, and reduced debris, thereby validating the feasibility of mechanical carving of tung oil-modified raw lacquer to some extent.