Eco-friendly fabrication of ZnO-TiO2-rGO nanocomposite for efficient adsorption-assisted organic dyes elimination

The growing interest in combining the photocatalytic properties of semiconductors like ZnO and TiO 2 with the superior electron conduction capabilities of graphene has resulted in the successful synthesis of in-situ reduced graphene oxide (rGO) supported ZnO-TiO 2 nanostructures through a simple microwave-assisted synthesis method. X-ray Diffraction Spectroscopy (XRD), Field Emission Scanning Electron Microscope (FESEM), UV–visible spectroscopy (UV–vis), and Fourier Transform Infrared Spectroscopy (FTIR) were employed to characterize structural, morphological and optical properties as well as surface functional groups of the synthesized products. The XRD measurements of our synthesized samples confirm both structural crystallinity and phase purity, while the FTIR analysis verifies the complete reduction of graphene oxide (GO) to reduced graphene oxide (rGO). The synthesized ternary nanocomposite ZnO-TiO 2 -rGO exhibited a remarkable 100 % adsorption-assisted removal efficiency for 20 mg/L methylene blue (MB) dye under ultraviolet light illumination within 120 min, along with a 56 % dye adsorption removal efficiency in the same time interval. In comparison, pure ZnO showed 0 % adsorption and only 31 % photocatalytic efficiency at the similar condition. Remarkably, the ZnO-TiO 2 -rGO nanocomposite exhibited exceptional photocatalytic activity mediated by adsorption, achieving complete degradation of MB dye within 5 min under sunlight irradiation. The photocatalytic efficiency and dye adsorption capacity were found to be significantly lower for the anionic dye methyl orange (MO) compared to the cationic MB dye. The study thoroughly investigated the influence of catalyst dose and initial dye concentration on photodegradation. The proposed mechanism indicates that the extensive surface area and numerous active sites on the rGO promote adsorption, which is then followed by degradation through the metal oxides. Overall, the results unveil that the microwave-assisted synthesis of ZnO-TiO 2 -rGO nanocomposite is a promising and environmentally friendly approach for efficiently degrading dyes from contaminated wastewater using both UV light and natural sunlight irradiation. • ZnO-TiO 2 -rGO nanocomposite was synthesized successfully by microwave assisted green synthetic protocol. • ZnO-TiO 2 -rGO exhibited excellent adsorption-assisted photocatalytic activity. • A remarkable photodegradation of cationic methylene blue dye was observed under natural sunlight irradiation. • Photodegradation data satisfied the pseudo first order, parabolic diffusion model and modified Freundlich model.

Authors

Institutions

Publication Details

Journal
Open Ceramics
Published
2024-10-02
DOI
https://doi.org/10.1016/j.oceram.2024.100691
Citations
10
Primary Topic
Nanomaterials for catalytic reactions
Type
article
Field-Weighted Citation Impact
2.50
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Eco-friendly fabrication of ZnO-TiO2-rGO nanocomposite for efficient adsorption-assisted organic dyes elimination

Ehsanur Rahman, Md. Elias, Md. Nizam Uddin, Rumana A. Jahan et al.
10 citations
Open Ceramics
Nanomaterials for catalytic reactions
2.50
article

Eco-friendly fabrication of ZnO-TiO2-rGO nanocomposite for efficient adsorption-assisted organic dyes elimination

Ehsanur Rahman, Md. Elias, Md. Nizam Uddin, Rumana A. Jahan, Sonia Akter, Shakhawat Hossain Firoz, Md. Awlad Hossain
article en
10 citations

Abstract

The growing interest in combining the photocatalytic properties of semiconductors like ZnO and TiO 2 with the superior electron conduction capabilities of graphene has resulted in the successful synthesis of in-situ reduced graphene oxide (rGO) supported ZnO-TiO 2 nanostructures through a simple microwave-assisted synthesis method. X-ray Diffraction Spectroscopy (XRD), Field Emission Scanning Electron Microscope (FESEM), UV–visible spectroscopy (UV–vis), and Fourier Transform Infrared Spectroscopy (FTIR) were employed to characterize structural, morphological and optical properties as well as surface functional groups of the synthesized products. The XRD measurements of our synthesized samples confirm both structural crystallinity and phase purity, while the FTIR analysis verifies the complete reduction of graphene oxide (GO) to reduced graphene oxide (rGO). The synthesized ternary nanocomposite ZnO-TiO 2 -rGO exhibited a remarkable 100 % adsorption-assisted removal efficiency for 20 mg/L methylene blue (MB) dye under ultraviolet light illumination within 120 min, along with a 56 % dye adsorption removal efficiency in the same time interval. In comparison, pure ZnO showed 0 % adsorption and only 31 % photocatalytic efficiency at the similar condition. Remarkably, the ZnO-TiO 2 -rGO nanocomposite exhibited exceptional photocatalytic activity mediated by adsorption, achieving complete degradation of MB dye within 5 min under sunlight irradiation. The photocatalytic efficiency and dye adsorption capacity were found to be significantly lower for the anionic dye methyl orange (MO) compared to the cationic MB dye. The study thoroughly investigated the influence of catalyst dose and initial dye concentration on photodegradation. The proposed mechanism indicates that the extensive surface area and numerous active sites on the rGO promote adsorption, which is then followed by degradation through the metal oxides. Overall, the results unveil that the microwave-assisted synthesis of ZnO-TiO 2 -rGO nanocomposite is a promising and environmentally friendly approach for efficiently degrading dyes from contaminated wastewater using both UV light and natural sunlight irradiation. • ZnO-TiO 2 -rGO nanocomposite was synthesized successfully by microwave assisted green synthetic protocol. • ZnO-TiO 2 -rGO exhibited excellent adsorption-assisted photocatalytic activity. • A remarkable photodegradation of cationic methylene blue dye was observed under natural sunlight irradiation. • Photodegradation data satisfied the pseudo first order, parabolic diffusion model and modified Freundlich model.

Open CeramicsVol. 20
Shahjalal University of Science and Technology (BD), Bangladesh University of Engineering and Technology (BD), University of Dhaka (BD), Jagannath University (BD)
Responsible consumption and production
Openalex Percentile: Top 11%
Nanomaterials for catalytic reactions
2.50
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.