Compaction Characteristics of Fly Ash and Pond Ash: A Comparative Analysis

This study investigates the compaction characteristics of Fly Ash and Pond Ash, which are by-products of coal combustion in thermal power plants. Thermal power plants generate three types of ash: (a) Fly Ash, (b) Pond Ash, and (c) Bottom Ash. Fly Ash consists of fine particles carried out of the boiler with flue gases, while Bottom Ash is the residue that settles at the bottom of the boiler. In most coal plants, Fly Ash is captured using electrostatic precipitators and other filtration equipment before the flue gases are released through the chimney. Pond Ash, on the other hand, is a by-product of thermoelectric power plants, often regarded as waste material, posing significant environmental disposal challenges. The compaction characteristics of Fly Ash and Pond Ash are influenced by various factors, including specific gravity, moisture content, compaction energy, layer thickness, and mold area. In this study, Fly Ash collected from NTPC Sipat , Chhattisgarh exhibited an Optimum Moisture Content (OMC) ranging from 18% to 27% and a Maximum Dry Density (MDD) ranging from 0.90 to 1.59 gm/cc under standard Proctor compaction energy. Similarly, Pond Ash demonstrated an OMC ranging from 33% to 46% and an MDD ranging from 0.856 to 1.248 gm/cc under the same conditions. The findings indicate that variations in these factors significantly affect the dry density of both Fly Ash and Pond Ash. The study also aims to determine the geotechnical properties of these materials, providing insights into their potential applications in engineering and environmental management