OPTIMIZING THE AMOUNT OF FLAME RETARDANT USED FOR SPRUCE WOOD

The study investigated the effect of the amount of selected retardant coatings produced and used in the Slovak Republic on the fire resistance of spruce wood samples. Experiments were conducted for two different types of flame retardants: intumescent flame retardant (IFR) and inorganic salt-based flame retardant (IS). Based on different amounts of coating applied to spruce wood samples, the important parameters as mass loss, mass loss rate and fire spread rate were determined. The experiment consisted of applying a flame source to the samples at an angle of 45° and monitoring the mass of the samples during the experiment. The findings show that when IFR is used, the protection effect of the wooden samples increases linearly with the amount of coating. However, for the samples on which an IS flame retardant was applied, a higher amount of coating had no effect on increasing the fire resistance of the wood. In this case, the average total mass loss was the same regardless of the amount of coating, yet a significant retardation effect was observed compared to the untreated samples. Samples treated with IFR showed a lower total mass loss and also a significantly lower maximum mass loss rate compared to the samples with applied IS flame retardant.