Simulation of bench-scale CO2 injection using a coupled continuum-discrete approach

Unintended releases of CO₂ from carbon capture and storage operations presents the risk of atmospheric emissions and groundwater or surface water quality impacts. Given the potential impacts, it is valuable to have tools capable of predicting groundwater concentrations and likely pathways of CO₂ migration in the subsurface. Traditional multiphase flow models struggle to simulate the discontinuous flow expected at leakage sites. This work applied a coupled continuum-discrete model, ET-MIP, to simulate a bench-scale injection of CO₂. Results demonstrate the capability of ET-MIP to accurately capture gas fingering behaviour, and the complexity of multicomponent mass transfer observed in the experiment. Simulations were computationally efficient, allowing for the use of multiple displacement pressure realizations. CO₂ migration in the subsurface was shown to be sensitive to mass transfer, as i) increased groundwater velocity can dissolve leaked CO₂ prior to reaching the surface and ii) background dissolved gases in the subsurface can impact the rate of upwards gas movement, gas distribution, and the composition and persistence of the gas phase. The sensitivity to mass transfer suggests it may be preferable to monitor for low-solubility gases in the source mixture rather than CO₂. These findings are applicable to other gases in the subsurface, such as hydrogen or methane migrating from geoenergy wells.