Appraisal of Characterization and Adsorption Isotherm in the Bioremediation of Cu and Zn Ions from Aqueous Solutions Exploiting Unmodified Corn and Coconut Husk

Environment is contaminated by heavymetals has emerged as a substantial globaly. Conventional remediation methods have proven inadequate and costly in addressing this issue. Hence, there is a pressing need to discover bio-remediation as a cost effective, effectual, and environmentally, a substitute for heavymetal removal. This work investigates the adsorption behaviour of Corn Husk (CH) and Coconut Husk (CCH), an inexpensive adsorbent, towards Cu and Zn ions for potential application in wastewater treatment. The physico-chemical variables of unmodified CH and CCH were appraised, and batch experimental methods were employed to study variables like pH, contact time, size of particle, and preliminary content of metals. The impact of solution pH on metals uptake by the adsorbent was investigated on the pH range of 3 to 8, revealing optimal removal efficiencies at pH 6 for Cu and pH 5 for Zn. Equilibrium adsorption times were determined to be 80 minutes for Cu and 60 minutes for Zn ions onto CH and CCH. adsorption volumes is conforming to mono-layer coverage, attained from the Langmuir plots were 4.792 mg/g and 4.594 mg/g respectively for Cu and Zn metals onto the CH and 4.771 mg/g and 4.400 mg/g for their adsorption onto CCH. Experimental values were confirmed to the Langmuir model and Freundlich model, with the Langmuir model providing the best fit. The CH based adsorbent was generally found to have an increased capacity of adsorption of the metal contents than Coconut husk (CCH). These findings underscore the strength of Corn husk as an active adsorbent to extract cationic heavymetal contents from industrial effluents.