Effects of Varying Nano-Montmorillonoid Content on the Epoxy Dielectric Conductivity

This study investigates the correlation between the interface structure and macroscopic dielectric properties of polymer-based nanocomposite materials. Utilizing bisphenol-A (BPA) epoxy resin (EP) as the polymer matrix and the commonly employed layered phyllosilicate montmorillonoid (MMT) as the nanometer-scale dispersive phase, nano-MMT/EP composites were synthesized using composite technology. The microstructure of the composite samples was characterized through XRD, FTIR, SEM, and TEM. Changes in the morphology of the nanocomposite interface were observed with varying MMT content, subsequently impacting dielectric polarization and loss. Experimental measurements of the dielectric spectrum of the nano-MMT/EP were conducted, and the influence of the material interface, at different nano-MMT contents, on the dielectric relaxation was analyzed. The study delves into the effect of the nanocomposite interface structure on ion dissociation and migration barriers, exploring the ionic conductivity of nano-MMT/EP. Lastly, an analysis of the impact of different nano-MMT contents on the dielectric conductivity is presented. From the experimental results, the arranging regularity of polymer molecules in the interface area raises. In the matrix, the ion migration barriers decrease significantly. The higher the MMT content in the interface, the lower the migration barrier is. Until the MMT content exceeds the threshold, the agglomerated micro-particles form, which decreases the polymers' space distribution regularity, and the ions migration barrier raises. According to the changes in the rule of the ions migration barrier with the composite interface structure content, the reason for dielectric conductivity changes can be judged.