Study of the Sliding Friction Coefficient of Different-Size Elements in Discrete Element Method Based on an Experimental Method

The materials involved in geotechnical engineering are objects of concern in granular mechanics. In order to study the influence of the sliding friction coefficient corresponding to different-sized elements in the discrete element method (DEM) on the simulation results, we establish a two-dimensional DEM model based on the experimental method to analyze a slope example. The correctness of the DEM model is verified by comparing the sliding surface of a finite element method (FEM) model and the DEM slope model. A sliding friction coefficient algorithm based on the experimental method is embedded into the DEM slope model and compared with the original model. The comparison results show that embedding the DEM model into the sliding friction coefficient algorithm leads to an increase in displacement. The reason for this is that the contact information between elements of different sizes has changed, but the displacement trend is the same. Different sliding friction coefficients should be set based on different-sized elements in the DEM, as they can improve simulation accuracy.