Large deformation problems arising from deep excavation in silt strata: A case study in Shenzhen, China

Deep excavations in silt strata can lead to large deformation problems, posing risks to both the excavation and adjacent structures. This study combines field monitoring with numerical simulation to investigate the underlying mechanisms and key aspects associated with large deformation problems induced by deep excavation in silt strata in Shenzhen, China. The monitoring results reveal that, due to the weak property and creep effect of the silt strata, the maximum wall deflection in the first excavated section (Section 1) exceeds its controlled value at more than 93% of measurement points, reaching a peak value of 137.46 mm. Notably, the deformation exhibits prolonged development characteristics, with the diaphragm wall deflections contributing to 39% of the overall deformation magnitude during the construction of the base slab. Subsequently, numerical simulations are carried out to analyze and assess the primary factors influencing excavation-induced deformations, following the observation of large deformations. The simulations indicate that the low strength of the silt soil is a pivotal factor that results in significant deformations. Furthermore, the flexural stiffness of the diaphragm walls exerts a notable influence on the development of deformations. To address these concerns, an optimization study of potential treatment measures was performed during the subsequent excavation of Section 2. The combined treatment approach, which comprises the reinforcement of the silt layer within the excavation and the increase in the thickness of the diaphragm walls, has been demonstrated to offer an economically superior solution for the handling of thick silt strata. This approach has the effect of reducing the lateral wall displacement by 83.1% and the ground settlement by 70.8%, thereby ensuring the safe construction of the deep excavation.