Study on the Performance of Laser Device for Attacking Miniature UAVs

In order to test the performance of laser devices for attacking miniature UAVs, we studied the principle of laser devices on soft killing and hard killing. Then, the flight test conditions of miniature UAVs were constructed, and the laser devices were tested and evaluated with the two indexes of maximum jamming range and maximum intercepting range. The first step involves calculating the far-field beam power density corresponding to the unmanned aerial vehicle (UAV) detection equipment and laser device at different distances. Subsequently, the signal electron count received by the UAV detector from the incident laser source target within the integration time tint is computed and compared against the full well charge of the photodetector. This comparison analyzes the UAV detector’s potential for dazzle/blind effects. When the laser device is positioned 600 m from the UAV, the ratio of signal electrons received by the detector to the full well charge was 13.53, indicating that the detector receives signal electrons exceeding the full well charge by over 10 times, thus causing UAV detector blindness. At a distance of 1.2 km from the UAV, this ratio reduces to 2.92, where the detector receives signal electrons around three times the full well charge, causing UAV detector dazzle. Experimental testing determines that the maximum interception distance of this laser device for small, slow-moving UAV equipment is 500 m. Finally, it is proved that the method can effectively test the attacking performance of laser devices, and provides a basis for improving the function and performance of laser devices.