Characterization of the stress-state dependent ductile fracture behavior for Q960 ultra-high-strength structural steel

• The influence of stress state on fracture initiation is studied for Q960 UHSS. • Stress-state coupled damage variable is proposed for undergoing large deformation . • The cold bendability of Q960 UHSS is assessed with H-C fracture initiation locus. Ultra-high-strength structural steels are gaining popularity in civil engineering due to their exceptional strength-to-weight ratio. However, their inherent lower ductility compared to normal strength structural steel warrants particular attention and further investigation for safety assessment. In this study, a total of 24 specimens made of Q960 ultra-high-strength steel (UHSS), including 21 tensile specimens with various stress states and 3 three-point bending specimens, were tested to assess its mechanical behavior undergoing large deformation . Subsequently, the impact of stress state on plasticity, damage evolution and fracture initiation was analyzed and characterized. The Bai-Wierzbicki yield surface with a deviatoric associated flow rule was identified to characterize the complex plasticity behavior of Q960 UHSS. With respect to damage evolution, the stress-state dependent fracture energy G f was proposed in this study to describe the damage softening behavior. The uncoupled Hosford-Coulomb locus with a non-linear weight function was utilized to predict the fracture initiation behavior. Finally, the utilized stress-state dependent constitutive models for Q960 UHSS, with the calibrated parameters and user-defined material subroutine VUMAT, were successfully verified through the three-point bending test with good agreement. Moreover, based on a parametric analysis of radius-to-thickness ratio, the bendability design regarding the minimum radius-to-thickness ratio of Q960 UHSS was proposed.