Laser energy-dependent processability of non-equiatomic TiNbMoTaW high-entropy alloy through in-situ alloying of elemental feedstock powders by laser powder bed fusion

Pre-alloyed powder, which is primarily used in laser powder bed fusion (LPBF), has the disadvantages of requiring time and high manufacturing costs. To overcome these limitations, in-situ alloying, which mixes pure elemental powders and alloys them in real-time during the LPBF process, has attracted attention. In particular, manufacturing high entropy alloys (HEA) containing high-melting-point refractory elements through in-situ alloying presents considerable challenges. In this study, a non-equiatomic single body-centered cubic (BCC) solid-solution HEA was fabricated via in-situ alloying with Ti, Nb, Mo, Ta, and W powders through the LPBF process. Specifically, by applying a high volumetric energy density (VED), we successfully mitigated the segregation of constituent elements, leading to an enhanced crystallographic texture. Consequently, the reduction in the residual stress and high-angle grain boundary (HAGB) density progressed, contributing to an increased relative density. Thus, this study marks a pioneering endeavor for in-situ alloyed HEA fabrication via LPBF, illustrating the efficacy of in-situ alloying utilizing mixed powders.