Influence of Graphene Nanoplatelets and Post-Curing Conditions on the Mechanical and Viscoelastic Properties of Stereolithography 3D-Printed Nanocomposites

This study presents an innovative approach to improving the mechanical and viscoelastic properties of 3D-printed stereolithography (SLA) nanocomposites by incorporating graphene nanoplatelets (xGNP) into photopolymer matrices. Utilizing an SLA 3D printer, photopolymer formulations with xGNP concentrations of up to 0.25 wt% were successfully produced. Post-print curing was carried out using two different methods: ultraviolet (UV) curing and high-temperature curing at 160 °C. Mechanical characterization using nanoindentation showed a significant increase in elastic modulus by 104% and an increase in hardness by 85% for nanocomposites containing 0.25 wt% xGNP. Furthermore, dynamic mechanical analysis (DMA) revealed a 39% improvement in storage modulus for samples without post-curing and an improvement of approximately 30% for samples subjected to high-temperature curing. These significant improvements highlight xGNP's potential to not only increase the performance of SLA 3D-printed components but also streamline the manufacturing process by reducing or eliminating energy-intensive post-curing steps. This innovative integration of graphene nanoplatelets paves the way for the production of high-performance, functional 3D-printed products and offers significant advances for various industries with a high impact. The results highlight the transformative role of nanomaterials in additive manufacturing and position this work at the forefront of materials science and 3D printing technology.