An Indoor Air Quality Analysis in Newly Constructed Apartments

This study analyzes the indoor air quality inspections of newly constructed apartments by the Busan Institute of Health and Environment for the last three years (2021-2023). Of the 41 inspections, 33 exceeded the recommended standard, and the average excess rate was 80.5%. When classified by measuring households, 148 out of 332 exceeded the standards, whereas, the average excess rate by household was 44.6%. Benzene was exceeded in two out of the 332 households; therefore, the excess rate was only 0.6%. However, the relative standard deviation was the largest, showing as the highest item in the scattergram. The average concentration of toluene was 1,006.0 µg/m3, which was 100.6% of the recommended standard and was exceeded by 138 households; hence, the excess rate was 41.6%. All six items(Formaldehyde, Benzene, Toluene, Ethylbenzene, Xylene, Styrene) reached the highest concentration in spring or summer when the indoor temperature increased. The average concentration of toluene in July was 1,922 µg/m3, close to 1.9 times the recommended standard; toluene is considered an item of particular concern in summer. In the correlation analysis with indoor temperature, the formaldehyde coefficient of determination was 0.4855, regarded as somewhat significant; it was difficult to confirm the correlation with temperature for the other five items, including benzene. In correlation with relative humidity, formaldehyde showed the same tendency as indoor temperature, with a coefficient of determination of 0.4404, which is believed to be due to its small molecular weight and high solubility. Due to the chimney effect, high concentrations of volatile organic compounds could be confirmed at low atmospheric pressure in the upper floors, and this trend was most evident for formaldehyde. For most items(Formaldehyde, Benzene, Toluene, Ethylbenzene, Styrene), a negative correlation was confirmed in which the emission amount decreased as the number of households increased. For large apartment houses, it is believed that it is due to sufficient bake-out and flush-out according to the adequate construction period and the use of eco-friendly and high-end building materials. Small apartments are classified together with many small houses. The emission concentration of small houses is relatively high because the proportion of the surface area where pollutants are released is high.

Authors

Publication Details

Journal
Journal of Environmental Analysis Health and Toxicology
Published
2024-09-27
DOI
https://doi.org/10.36278/jeaht.27.3.151
Citations
1
Primary Topic
Indoor Air Quality and Microbial Exposure
Type
article
Field-Weighted Citation Impact
0.31
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

An Indoor Air Quality Analysis in Newly Constructed Apartments

So Yoon Kim, Jeong-Mi Kim, Sang-Woong Yoo, Kyeong-Rim Ryu et al.
1 citations
Journal of Environmental Analysis Health and Toxicology
Indoor Air Quality and Microbial Exposure
0.31
article

An Indoor Air Quality Analysis in Newly Constructed Apartments

So Yoon Kim, Jeong-Mi Kim, Sang-Woong Yoo, Kyeong-Rim Ryu, Hyun-Chel Jeong, Jung-Won Son, Hwa-Seong Ji
article en
1 citations

Abstract

This study analyzes the indoor air quality inspections of newly constructed apartments by the Busan Institute of Health and Environment for the last three years (2021-2023). Of the 41 inspections, 33 exceeded the recommended standard, and the average excess rate was 80.5%. When classified by measuring households, 148 out of 332 exceeded the standards, whereas, the average excess rate by household was 44.6%. Benzene was exceeded in two out of the 332 households; therefore, the excess rate was only 0.6%. However, the relative standard deviation was the largest, showing as the highest item in the scattergram. The average concentration of toluene was 1,006.0 µg/m3, which was 100.6% of the recommended standard and was exceeded by 138 households; hence, the excess rate was 41.6%. All six items(Formaldehyde, Benzene, Toluene, Ethylbenzene, Xylene, Styrene) reached the highest concentration in spring or summer when the indoor temperature increased. The average concentration of toluene in July was 1,922 µg/m3, close to 1.9 times the recommended standard; toluene is considered an item of particular concern in summer. In the correlation analysis with indoor temperature, the formaldehyde coefficient of determination was 0.4855, regarded as somewhat significant; it was difficult to confirm the correlation with temperature for the other five items, including benzene. In correlation with relative humidity, formaldehyde showed the same tendency as indoor temperature, with a coefficient of determination of 0.4404, which is believed to be due to its small molecular weight and high solubility. Due to the chimney effect, high concentrations of volatile organic compounds could be confirmed at low atmospheric pressure in the upper floors, and this trend was most evident for formaldehyde. For most items(Formaldehyde, Benzene, Toluene, Ethylbenzene, Styrene), a negative correlation was confirmed in which the emission amount decreased as the number of households increased. For large apartment houses, it is believed that it is due to sufficient bake-out and flush-out according to the adequate construction period and the use of eco-friendly and high-end building materials. Small apartments are classified together with many small houses. The emission concentration of small houses is relatively high because the proportion of the surface area where pollutants are released is high.

Journal of Environmental Analysis Health and ToxicologyVol. 27(3)
Openalex Percentile: Top 37%
Indoor Air Quality and Microbial Exposure
0.31
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.