Sensitivity-enhanced optical fiber sensor based on the Vernier effect for detection of ammonia in water

A sensitivity-enhanced optical fiber sensor for the detection of dissolved ammonia in water based on the Vernier effect is proposed and demonstrated. The sensor comprises a sensing Fabry-Perot interferometer (S-FPI) and a reference Fabry-Perot interferometer (R-FPI) in parallel. The S-FPI is an open cavity fabricated by the dislocation welding of single-mode fiber(SMF), which is filled with a mixture of ultraviolet-curable resin NOA 170 and Oxazine 170 perchlorate (O17). The R-FPI is a sealed cavity, which is constructed by fusion splicing of SMF and hollow core fiber (HCF). The proposed sensor is based on the chemical reaction between the dissolved ammonia and O17. This chemical reaction alters the refractive index (RI) of the S-FPI, resulting in a wavelength shift of the reflected spectrum. The two interferometers exhibit a nearly identical free spectral range (FSR), thereby enabling the generation of the Vernier effect, which markedly enhances the ammonia sensitivity of the sensor. Experimental results indicate that the sensor sensitivity is 0.34 nm/ppm in the dissolved ammonia range of 5-40 ppm, which is approximately 9.1 times that of the single S-FPI. The proposed sensor exhibits both good repeatability and a short response time, in addition to selectivity for the detection of ammonia.