Analysis, design, and implementation of a simple switched‐coupled‐inductor boost DC‐AC inverter

Abstract This paper presents a simple switched‐coupled‐inductor inverter (SCII), as well as completes the relevant analysis, design, and implementation, for efforts aimed at achieving boost DC‐AC inversion and strengthening closed‐loop regulation. In structure, the power‐part circuit consists of switched‐coupled‐inductor booster and half‐bridge DC‐link inverter, connected in cascade between supply and output to work for the AC output range as ( n : turn ratio, : ratio cycle). As adopting , , , the output can be lifted to (i.e., DC 24 V to AC 100 Vrms, 60 Hz). In control, the control‐part circuit consists of phase generator and sinusoidal pulse‐width‐modulation (SPWM) block and generates driver signals of switches according to the feedback signal of for the needs of timing sequence (to different topologies) and output regulation/robustness (to various desired output/loading variation). The related chip circuit is designed via pre‐/post‐layout Cadence procedure and then practically is implemented on a real chip (D35‐106B‐E0027, TSMC 0.35 μm, 1500 × 1500 μm 2 , 3.3 V, 2.146 mW, 100 kHz max., 18S/B) via the assistance of TSMC and Chip Implementation Center (CIC). In theory, some relevant analysis and design will be discussed, such as modeling, conversion ratio, power efficiency, parameter selection, system stability, and control design. In implementation, several simulation/experiment cases via testing on the SCII's prototype circuit are illustrated to examine the efficacy of the proposed scheme.