Winter Maintenance Multispectral Performance Evaluation: Salt Brine versus Solid Salt Applications

Performance measures that are commonly used in winter maintenance provide valuable information. However, some metrics are subjective (i.e., visual inspection), rely on historical records, depend on agencies’ practices, or only capture specific information. Winter maintenance performance measures are evaluated independently, and relationships among variables are not assessed. Therefore, the metric travel disruption (TD) is proposed in this study to perform a multispectral evaluation with input, output, and outcome-based performance measures to compare salt brine with solid salt applications. The metric TD integrates different sources of information to estimate a continuous performance measure that accounts for storm, vehicle operations, and roadway conditions over time instead of intermittent measurements or one-time observations, such as roadway friction or time to bare/wet. The input performance measures included storm conditions, type of chemical material, frequency of application, and application rate. The output performance measures were the amount of material used and the lane kilometer (miles) covered. The outcome performance measures consisted of time to bare/wet, speed reduction period, speed recovery period, storm impact period, maximum speed reduction, and TD. For salt brine, previous research has shown reduced salt usage, shorter times to bare/wet, and higher friction. However, there are some concerns regarding the operational and safety performance of roadways that are treated with salt brine. Winter treatment field data and vehicle probe data from the National Performance Management Research Data Set (NPMRDS) were collected from the study (salt brine) and control (solid salt) routes in Wisconsin. For the amount of salt used, the study routes used 32.6% less overall salt than the control routes per storm. The TD indicated that, on average, there was no statistically significant difference between the study and control routes. Despite the lower amount of salt that was used, roadways that were treated with salt brine had a similar operational performance as roadways that were conventionally treated with solid salt, which made salt brine application a cost-effective strategy. This evaluation demonstrated a multispectral performance evaluation of winter maintenance to appropriately quantify the effectiveness of treatments.

Authors

Institutions

Publication Details

Journal
Journal of Cold Regions Engineering
Published
2024-09-16
DOI
https://doi.org/10.1061/jcrgei.creng-834
Citations
1
Primary Topic
Smart Materials for Construction
Type
article
Field-Weighted Citation Impact
0.13
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Winter Maintenance Multispectral Performance Evaluation: Salt Brine versus Solid Salt Applications

David A. Noyce, Andrea Bill, Boris Claros, Madhav Chitturi et al.
1 citations
Journal of Cold Regions Engineering
Smart Materials for Construction
0.13
article

Winter Maintenance Multispectral Performance Evaluation: Salt Brine versus Solid Salt Applications

David A. Noyce, Andrea Bill, Boris Claros, Madhav Chitturi, César Andriola
article en
1 citations

Abstract

Performance measures that are commonly used in winter maintenance provide valuable information. However, some metrics are subjective (i.e., visual inspection), rely on historical records, depend on agencies’ practices, or only capture specific information. Winter maintenance performance measures are evaluated independently, and relationships among variables are not assessed. Therefore, the metric travel disruption (TD) is proposed in this study to perform a multispectral evaluation with input, output, and outcome-based performance measures to compare salt brine with solid salt applications. The metric TD integrates different sources of information to estimate a continuous performance measure that accounts for storm, vehicle operations, and roadway conditions over time instead of intermittent measurements or one-time observations, such as roadway friction or time to bare/wet. The input performance measures included storm conditions, type of chemical material, frequency of application, and application rate. The output performance measures were the amount of material used and the lane kilometer (miles) covered. The outcome performance measures consisted of time to bare/wet, speed reduction period, speed recovery period, storm impact period, maximum speed reduction, and TD. For salt brine, previous research has shown reduced salt usage, shorter times to bare/wet, and higher friction. However, there are some concerns regarding the operational and safety performance of roadways that are treated with salt brine. Winter treatment field data and vehicle probe data from the National Performance Management Research Data Set (NPMRDS) were collected from the study (salt brine) and control (solid salt) routes in Wisconsin. For the amount of salt used, the study routes used 32.6% less overall salt than the control routes per storm. The TD indicated that, on average, there was no statistically significant difference between the study and control routes. Despite the lower amount of salt that was used, roadways that were treated with salt brine had a similar operational performance as roadways that were conventionally treated with solid salt, which made salt brine application a cost-effective strategy. This evaluation demonstrated a multispectral performance evaluation of winter maintenance to appropriately quantify the effectiveness of treatments.

Journal of Cold Regions EngineeringVol. 38(4)
University of Wisconsin System (US), University of Wisconsin–Madison (US)
Openalex Percentile: Top 60%
Smart Materials for Construction
0.13
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.