Hydrogel Capacitors Based on MoS2 Nanosheets and Applications in Glucose Monitoring

Non-invasive/minimally invasive continuous monitoring of blood glucose and blood glucose administration have a high impact on chronic disease management in diabetic patients, but the existing technology is yet to achieve the above two purposes at the same time. Therefore, this study proposes a microfluidic microneedle patch based on 3D printing technology and an integrated control system design for blood glucose measurement, and a drug delivery control circuit based on a 555 chip. The proposed method provides an improved preparation of a PVA-PEG-MoS₂ nanosheet hydrogel, making use of its dielectric properties to fabricate a microcapacitor and then embedding it in a microfluidic chip. When MoS₂ nanosheets react with interstitial liquid glucose (and during the calibration process), the permittivity of the hydrogel is changed, resulting in changes in the capacitance of the capacitor. By converting the capacitance change into the square-wave period change in the output of the 555 chip with the control circuit design accordingly, the minimally invasive continuous measurement of blood glucose and the controlled release of hypoglycemic drugs are realized. In this study, the cross-linking structure of MoS₂ nanosheets in hydrogel was examined using infrared spectroscopy and scanning electron microscopy (SEM) methods. Moreover, the critical doping mass fraction of MoS₂ nanosheets was determined to be 2% via the measurement of the dielectric constant. Meanwhile, the circuit design and the relationship between the pulse cycle and glucose concentration is validated. The results show that, compared with capacitors in series, the microcapacitors embedded in microfluidic channels can be connected in parallel to obtain better linearized blood glucose measurement results.