WiLo: Long-Range Cross-Technology Communication From Wi-Fi to LoRa

Wi-Fi is a very common means for providing wireless access to the Internet, e.g., using the 2.4GHz Industrial, Scientific, and Medical (ISM) band and more recently also the 6 GHz band via Wi-Fi 6E. Thanks to a chip recently launched by Semtech, in the same 2.4GHz band now can also operate Long Range (LoRa), which is widely used in Internet of Things (IoT) applications due to its low power consumption and wide coverage range. To allow for data interchange among these technologies, multi-radio gateways are needed, which introduce additional costs, complexities, and potential points of failure. To address this challenge, we propose the concept of Wireless to LoRa (WiLo) to make directional communication from Wi-Fi to LoRa. WiLo uses physical-layer (PHY) communication and dedicated input chips in the 2.4 GHz band to transmit information. To overcome the modulation technique differences between Wi-Fi and LoRa, WiLo leverages narrow-band communication, a technique that generates ultra-narrowband signals using single-tone sinusoidal signals by manipulating the payload of Wi-Fi devices. These signals can be detected by LoRa Wide Area Network base stations due to their high receiver sensitivity for long-range communication. Our experiments, which make use of both Universal Software Radio Peripheral (USRP) and commodity devices, demonstrate that WiLo can achieve concurrent wireless communication over a distance of 500 m, from commercial Wi-Fi chips to a LoRaWAN, with more than 96% frame reception rate. These findings show the effectiveness of WiLo in enabling reliable and efficient wireless communication over long distances, making it particularly relevant for applications such as remote monitoring systems, sensor networks, and smart cities.