Numerical investigation on the ventilated supercavitating model with propeller

To achieve stable and continuous supercavitating flow over underwater vehicles, artificial ventilation is implemented, particularly effective at lower speeds. Previous research on supercavitation primarily focused on analyzing ventilated supercavitating flow with various cavitator types and/or ventilation rates. In this investigation, we examine the behavior of ventilated supercavitating flow over an axisymmetric model featuring both a disk cavitator and a Postdam propeller placed at the bow. Utilizing the Large Eddy Simulation turbulence model, Volume of Fluid method, and Kunz cavitation model, our simulation aims to capture the cavitating flow around the propeller and the ventilated supercavitating flow over the model. Validation of our numerical methods is achieved by comparing our results with experimental data of a ventilated model by Chung and Cho [“Ventilated supercavitation around a moving body in a still fluid: Observation and drag measurement,” J. Fluid Mech. 854, 367–419 (2018)] and the cavitating Postdam propeller by SVA Postdam [S. Potsdam, “PPTC smp'11 Workshop,” in Proceedings of the Workshop on Cavitation and Propeller Performance (2011)]. The results show that with a rotating propeller at the bow of the supercavitating model, the cavitating flow extends and stabilizes compared to configurations utilizing a traditional disk cavitator. The presence of the propeller accelerates the formation of supercavitating flow at a consistent incoming flow speed. Additionally, coupling the propeller with the disk cavitator results in significant increases in propeller thrust, torque, and efficiency. While there is an observed rise in model drag, the impact is not substantial.