The SG‐Climbot: An Adaptable, Efficient, Inspection and Repair Robot for Steam Generator Heat Transfer Tube Sheet

ABSTRACT The steam generator plays a crucial role as a safety component and protective barrier in nuclear power plants. Regular inspection and repair of heat transfer tubes, which operate in high‐temperature, high‐pressure, corrosive, and abrasive environments for extended periods, are essential. Inspection and repair robots move inside the steam generator to conduct comprehensive inspections and evaluations of the heat transfer tubes. However, existing robots have relatively simple execution devices and fixed movement methods, resulting in poor adaptability to different specifications of tube sheets and limited flexibility in handling maintenance tasks. In response to these limitations, the SG‐Climbot, a quadruped crawling tube sheet inspection and repair robot, has been proposed. This robot is designed to adapt to full‐specification tube sheets and operate efficiently by conducting inspections while moving. By comparing different motion modes, a robot configuration with a quadruped parallel structure was suggested. Kinematic and static analyses were conducted, resulting in the development of both forward and inverse kinematic models, along with the identification of conditions leading to tipping. Using parametric modeling and optimization design, optimized design parameters were obtained. Finite element simulation analysis was performed on the overall structure and main components, leading to an optimized structural model. Finally, based on the design model and computational analysis, a prototype was developed and tested. The experimental results indicate that the robot has achieved the expected functionality and performance targets. Its efficient maintenance operation mode of conducting inspections while moving provides a basis for the autonomous and intelligent development of steam generators.