Multicriteria evaluations for sand production potentials: a case study from a producing oil field in the Niger Delta Basin (Nigeria)

Geomechanical evaluation of three wells in an onshore Niger Delta Oil Field in which some reservoirs have histories of free water production was carried out to predict their potential for sand production. The mechanical characteristics of the reservoirs, such as the Poisson ratio (v), shear modulus (G), elastic modulus (E), bulk modulus (Kb), and bulk compressibility, were calculated using petrophysical parameters such as s-velocity (Vs), p-velocity (Vp), gamma ray index (IGR), the volume of shale (Vsh), porosity (), and pseudo factor (q) derived from wireline logs (Cb). Five geomechanical techniques—porosity, acoustic wave travel time, sand production index, Schlumberger sand production index, and shear modulus to bulk compressibility ratio (G/Cb) were used to forecast the potential for sand production in the reservoirs. The porosity values varied from 14 to 27%, which is below the threshold value of 30% for sand production. The acoustic wave travel time ranged from 81.59 to 89.91s/ft, which is below the threshold value of 104s/ft for sand production. The threshold value for the sand production index was < 2.9 ×106psi. The values for the sand production index fell between 11x 106psi and 12.4 x 106psi, which is below the limits for the onset of sanding. The G/Cb values in the reservoirs across the three wells fell between 1.15 x 1012psi2 and 1.43 x 1012psi2 while the threshold value for the Schlumberger sand production index fell between 1.15 x 1012psi2 and 1.43 x 1012psi2. Only the Schlumberger criterion predicted the potential for likely sand production.