Influence of hollow droplet impact and spreading characteristics on the cylindrical lateral surface

In this study, 3D model of a hollow glycerin droplet impacting on a cylindrical cross-section was numerically analyzed to coat the lateral surface of the cylinder. The hollow droplets had exterior diameters of 5.5 mm, 5.25 mm, and 5 mm, and the impact velocity was 1 m/s. To model, the influence of droplets on OpenFoam software, the Volume Of Fluid technique was utilized (VOF). The Newtonian, incompressible, and laminar fluid phase of a glycerin droplet was investigated using air with a diameter of 4 mm as the gas phase. The hydrodynamic behavior of droplet collisions as well as fluid properties were investigated. As a result, when can be observed in the simple cylinder, as the outer diameter increased, the spread diameter shrank. The least amount distributed diameter in Case 3 was 1.404, whereas the highest amount in Case 4 was 1.625. The situations with a simple lateral surface, uniform spread occurred, while in cases with a spiral lateral surface, non-uniform spread occurred. Observed the maximum length in Case 3 was 4.12 mm and the minimum was 1.83 mm in Case 4.