Experimental and numerical investigation of the modal parameters for thin laminated composite plates

In the present work, glass fiber-reinforced (GFR) composite specimens were fabricated using the vacuum-bag molding process. The properties related to the vibrational response of the fabricated composite plates, such as natural frequency, modal density, and damping loss factor (DLF), were investigated through both experimental and numerical approaches. The effects of different parameters, including boundary conditions (BCs), fiber orientations, laminate layer numbers, and aspect ratios, were comprehensively studied. It was found that the experimental and numerical results were in close agreement. For each case, finite element analysis was performed to determine the natural frequencies and mode shapes. Regarding the various BCs, the DLF was observed to be highest (0.47) for fully clamped BC and lowest (0.12) for free-free BC, whereas the modal density was highest (0.068) for cantilever BC and lowest (0.037) for fully clamped BC. In terms of different lamination schemes, the DLF was highest (0.42) for a plate with quasi-isotropic fibers and lowest (0.25) for a plate with unidirectional fibers, while the modal density was highest (0.068) for quasi-isotropic fibers and lowest (0.047) for unidirectional fibers. Regarding the plates with different laminate layers, the highest DLF (0.47) was observed for a plate with 16 layers, while the lowest DLF (0.33) was found in a plate with 8 layers. Conversely, the highest modal density (0.067) was observed for a plate with 8 layers, and the lowest (0.057) was noted for a plate with 16 layers. Lastly, considering aspect ratios, the highest DLF (0.48) was observed for an aspect ratio of 0.5, and the lowest (0.26) for an aspect ratio of 1.5. The highest modal density (0.09) was also observed for an aspect ratio of 0.5, while the lowest modal density (0.045) was for an aspect ratio of 1.5.