Design and Finite Element Analysis of a Thresher for Palm Oil (Elaies guineensis) Extraction Plant

This study presents the design and Finite Element Analysis (FEA) of a thresher used in palm oil (Elaeis guineensis) extraction plants. The FEA was performed to ensure safe and cost effective of the thresher before fabrication. The analytical design of the threshing shaft and drum of the thresher was validated using SolidWorks (2021) CAD software for static simulation, employing plain carbon steel as the material. For the threshing shaft, forces of and were applied at strategic points, resulting in a maximum bending stress of , significantly below the yield strength of . The shaft's diameter of 50 mm was confirmed as adequate with a factor of safety (FOS) ranging from 3.17 to 142.42, validating the shaft design's safety for fabrication. Similarly, the drum unit, supported by a spider arm and cylindrical bars, was subjected to an equivalent twisting moment of 861.25 Nm and a batch weight of 1226.25 N. The maximum von Mises stress of was well within safe limits, indicating robustness under operational loads. The maximum resultant displacement and equivalent strain were respectively which can be said to be minimal, reinforcing the drum's structural integrity. A minimum FOS of 20.45 further highlighted the drum's durability and resistance to fatigue. These results confirm the reliability and safety of the designed thresher components, ensuring efficient and sustainable palm oil extraction.