Comparative characterizations of plant and mineral dye as potential photosensitizer in Dye-Sensitized Solar Cell

The advent of dye-sensitized solar cells (DSSC) has expansively seen more studies as an alternative to silicon-based and thin-film solar cells due to their simple structure and relatively low production cost. In dye-sensitized solar cells, the dye is one of the major components for high power conversion efficiencies. The extracted dyes were characterized by powder x-ray diffraction, x-ray fluorescence, Scanning electron microscopy, UV-visible spectroscopy, and Gas Chromatography-Mass spectrometry analysis. The structure of the mineral dye contains constituents that enhance better absorption of solar radiation for use in a Dye-Sensitized Solar Cell (DSSC). The calcium and iron content of the mineral dye studied as revealed by the mineralogical analysis done using the powder x-ray diffraction (XRD) and the x-ray fluorescence (XRF) suggest this. These metals serve as bounding complexes to other organic components in the dye, like in the case of Ruthenium complexes dye for efficient absorption of solar radiation, especially in the visible light region. The functional groups present in the dye also confirm what favors good absorption of solar radiation for DSSC application. The Organic chemical compositions present in the mineral dye which were obtained by the Gas Chromatography-Mass spectrometry analysis also confirm the functional groups of carbonyl, Amine, and hydroxyl revealed by FTIR, which were responsible for solar radiation absorption. There are strong absorption narrow bands in the visible region with peaks at around 424 nm (2.903 a.u) and 486 nm (2.973 a.u). Optical band gaps of 1.66 eV and 2.27 eV for the mineral dye and plant dye respectively, were obtained. The properties of the dyes studied give potential substitutes to the relatively expensive ruthenium-based dyes for use in DSSC fabrication.