Surface Reaction-Diffusion-Coupled Simulation of Ni–Fe–Cr Alloy under FLiNaK Molten Salt

A molten salt reactor is one of the fourth-generation reactors and is considered to be a feasible replacement for current reactors due to their many advantages. However, there are a number of issues that remain; one of which is the corrosion of the materials. Corrosion problems in molten salt reactors have been reported since The Molten Salt Reactor Experiment at Oak Ridge National Laboratory in the 1960s. There have been many attempts to mitigate the corrosion problem, but a fundamental solution has not yet been achived. In this study, surface reaction-diffusion-coupled simulations were performed to simulate the corrosion of a Ni–Cr–Fe material, a prototype of Hastelloy N, which is being promoted as a structural material for molten salt reactors in F–Li–Na–K eutectic salts. This surface reaction-diffusion-coupled simulation framework was developed to study which corrosion reactions are dominant in molten salt environment corrosion where a large number of oxidation–reduction reactions exist, the correlation between composition of alloy and corrosion rate, and the effect of Cr depletion on corrosion.