Efficacy of IS Code Provisions for Design of Eccentrically Loaded Single Angle Compression Members

In practical applications, steel single angles are often subjected to eccentric loading when connected to a gusset plate through one leg only, resulting in complex compression behaviour. This behaviour has not been as extensively studied as that of concentrically loaded members. Various international codes of practice offer differed approaches for designing these elements. The literature indicates that the Indian Standard Code IS 800–2007 accurately predicts the axial capacity of eccentrically loaded single angle columns. However, a recent amendment to IS 800 in 2024 introduced modified design provisions. This study is the first to explore the implications of these latest design provisions by comparing them with earlier provisions and experimental strengths reported in the literature. Initially, the design strengths as per the previous and latest design provisions for various Indian Standard Angles (ISA) were presented and compared accounting for varying slenderness ratio, plate slenderness ratio (b/t), and different types of end connections and restraints. The findings reveal that the latest design provisions generally result in much higher design strengths compared to the earlier provisions, with a maximum increase of 104.84%. Upon noticing the significant variation, this study is further extended to compare with the reported data available in the literature. The nominal strengths calculated using the latest provisions were often higher than the strengths reported in the literature considered in this study, indicating potential unsafe design.