Interlaminar fracture properties of <scp>UV</scp> and plasma‐treated glass fiber epoxy composites

Abstract Despite the low density and high specific strength properties, the fiber‐reinforced composites are characterized by a relatively low interlaminar fracture toughness and their ultimate properties are strongly affected by the fiber matrix adhesion. This study aims to investigate the influence of fiber surface treatments, such as UV and atmospheric plasma, and of the interfacial shear strength, on the flexural properties and Mode I interlaminar fracture toughness of glass fiber epoxy composites. The vacuum‐assisted resin infusion technique is used for the composite fabrication. Scanning Electron Microscopy analysis is used to observe and to explain the changes in the morphology of the fibers after surface treatment. Remarkably, the results showed an overall reduction in the mechanical properties. The interfacial shear strength values of the UV and plasma‐treated samples were reduced by 34.9% and 49.5% respectively. The flexural strength was reduced by 7.9% and 5.9% respectively. The Mode I fracture toughness values for the UV and plasma‐treated samples were also reduced by 49.8% and 62.2% respectively. Highlights UV and plasma treatments were performed on glass fibers to improve performance. Push‐out tests were carried out to evaluate fiber/matrix adhesion. An aerospace grade epoxy resin curing in thermal press‐clave was used. Mechanical tests related Interfacial Shear Strength to composites performance.