MODELLING OF A TBPS SYSTEM FOR 5G WIRELESS COMMUNICATION UTILIZING DWDM RFoF

In recent times, several sectors and businesses have been doing extensive research on the usage of Dense Wavelength Division Multiplexing (DWDM) and Radio Frequency Over Fiber (RFOF). These two technologies are considered to be the most significant features. Increasing the data rate was a significant challenge that needed to be addressed, and the goal was to successfully implement a fiber optic system that was dependable and had a high number of associated channels. As a consequence of this, a 64-channel DWDM RFOF system that is capable of supporting a larger number of data rates of 2.56 Tbps has been designed and implemented in this study. A significant number of channels that have been sampled will be chosen for inquiry based on the characteristics of Quality Factor (QF) and Bit Error Rate (BER) that have been researched. This study will be carried out with the assistance of Optisystem software. These findings would be investigated at distances ranging from sixty to one hundred eighty kilometers, with the NRZ modulation format being used and a lunched power of zero decibels per meter. Additionally, the purpose of this study would be to explore the three distinct techniques of compensation, namely pre, post, and symmetrical, to quantify the individual performance of each approach on the suggested system. According to the findings, the use of symmetrical-based compensation yielded the most favorable outcomes, with the average QF produced falling within the range of (20.33-14.09) dBm over distances ranging from (60-180) kilometers. This demonstrates the dependability of the proposed system.