Small scale laboratory monotonic and cyclic pull out testing on grout and resin encapsulated cable bolts

Axial studies on cable bolts can be conducted using various scale testing apparatuses. Large scale testing, while providing a powerful platform for testing, is expensive and time consuming. This study presents details of a small scale pull out testing campaign on cable bolts and investigates the results achieved. Six popular types of cable bolts were studied using an anti rotation apparatus while encapsulated in cementitious grout and resin. The resin samples were tested under both monotonic and cyclic loading patterns. The results showed that grouted bulbed cables require higher displacement to reach their maximum load capacity which is lost at failure, while plain cables tend to hold lower loads for a longer time. Resin samples provided strain softening behaviour with low capacities, particularly in absence of cable indentation or bulbs. Cyclic loading tended to adversely affect the post peak behaviour of the resin samples, especially in the bulbed cables. Failed samples inspected after the testing suggested a non-uniform damage profile along the cable with extensive damage at the exit point transitioning into almost no damage at the entry point. • Design and manufacturing of a small scall pull out apparatus. • Testing various modern cable bolts comprising multiple cable bolt design trends. • Comparing the performance of cementitious and resin grout in pull out test. • Comparing cable bolts in monotonic and cyclic loading scenarios.