Effect of Preload on Box-Section Steel Columns Filled with Concrete under Axial Load: A Numerical Study

External loads applied to a box-section steel column before it is filled with concrete to increase its efficiency due to modifications in structural systems or design errors may reduce its ultimate capacity and change its structural behavior. To examine this effect, finite element modeling (FEM) has been used to simulate these columns under preloading at different ratios with many variables in the geometric dimensions of the columns. The FEM results have been investigated using 38 experimental specimens obtained from previous studies without preloading. The results demonstrated high accuracy in modeling these columns in structural behavior and ultimate load capacity. After verifying the results, 84 Concrete-Filled Steel Columns (CFSC) were modeled under different preload ratios. The results indicated that some variables have directly affected the value of the decrease in column capacity in terms of its height, wall thickness, yield stress, and preload ratios, while others were inversely proportional in terms of the cross-section dimensions and concrete strength. The preload effect ratio had two separate limits, where when it reached 70%, the maximum value of the decrease in column capacity was 10.90%. The value increased sharply reaching 19.90% when there was a preload equal to 80%. New equations have been proposed to predict the ultimate capacity of CFSC under preloading with suitable accuracy with a correlation coefficient of no less than 0.949.