Weak Signal Ultrafast Interrogation of Micro-nano FBG Probe Sensor Based on Hybrid Amplified Dispersion Fourier-transform Method

To elucidate the thermal transport mechanisms at interfaces in micro- and nanoscale electronic devices, real-time monitoring of temperature variations at the microscopic and nanoscopic levels is crucial. Micro-nano fiber Bragg grating (FBG) sensors have been demonstrated as effective in-situ optical temperature probes for measuring local temperatures. Time-stretch dispersion Fourier transform (TS-DFT) that enables fast, continuous, single-shot measurements in optical sensing has been integrated with a micro-nano FBG probe (FBG<sub>P</sub>) for local temperature sensing. However, its temperature sensitivity and interrogation resolution are limited by the detection sensitivity. In this paper, we propose a hybrid amplified dispersion Fourier transform (ADFT) method to achieve ultrafast interrogation of FBG<sub>P</sub>'s weak signal. Thanks to the combined effect of TS-DFT and hybrid optical amplification, the reflection signal of the FBG<sub>P</sub> is amplified, and the wavelength shift of the FBG<sub>P</sub> sensor is converted to a temporal spacing change between two dispersed pulses through dispersion-induced wavelength-to-time mapping. The proposed method uses a homemade dissipative soliton mode-locked laser as the light source. The hybrid optical amplification technique comprises a L-band erbium-doped fiber amplifier and a distributed Raman amplifier. Their noise figure and net gain for the FBG<sub>P</sub> are 4.81 dB and 15.93 dB, respectively. In addition, the temperature calibration experiments show that a sampling rate of 51.43 MHz and the maximum temperature measurement error of 1.98°C are achieved within the temperature range of 20.3°C to 97°C. The stability of the net gain provided by the hybrid ADFT system is demonstrated by the coefficient of variation, which ranges from 2.22% to 2.95% in the peak voltage signal of the FBG<sub>P</sub>. This approach applies to scenarios requiring the handling of weak optical signals, particularly in temperature measurement at the micro-nano scale.

Authors

Publication Details

Journal
Optics Express
Published
2024-09-20
DOI
https://doi.org/10.1364/oe.537177
Primary Topic
Advanced Fiber Optic Sensors
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Weak Signal Ultrafast Interrogation of Micro-nano FBG Probe Sensor Based on Hybrid Amplified Dispersion Fourier-transform Method

Shupeng Liu, Jiashuo Chen, Shaoying Li, Na Chen et al.
Optics Express
Advanced Fiber Optic Sensors
article

Weak Signal Ultrafast Interrogation of Micro-nano FBG Probe Sensor Based on Hybrid Amplified Dispersion Fourier-transform Method

Shupeng Liu, Jiashuo Chen, Shaoying Li, Na Chen, Yong Liu, Yana Shang, Zhenmin Liu, Tingyun Wang, Fufei Pang
article en

Abstract

To elucidate the thermal transport mechanisms at interfaces in micro- and nanoscale electronic devices, real-time monitoring of temperature variations at the microscopic and nanoscopic levels is crucial. Micro-nano fiber Bragg grating (FBG) sensors have been demonstrated as effective in-situ optical temperature probes for measuring local temperatures. Time-stretch dispersion Fourier transform (TS-DFT) that enables fast, continuous, single-shot measurements in optical sensing has been integrated with a micro-nano FBG probe (FBG<sub>P</sub>) for local temperature sensing. However, its temperature sensitivity and interrogation resolution are limited by the detection sensitivity. In this paper, we propose a hybrid amplified dispersion Fourier transform (ADFT) method to achieve ultrafast interrogation of FBG<sub>P</sub>'s weak signal. Thanks to the combined effect of TS-DFT and hybrid optical amplification, the reflection signal of the FBG<sub>P</sub> is amplified, and the wavelength shift of the FBG<sub>P</sub> sensor is converted to a temporal spacing change between two dispersed pulses through dispersion-induced wavelength-to-time mapping. The proposed method uses a homemade dissipative soliton mode-locked laser as the light source. The hybrid optical amplification technique comprises a L-band erbium-doped fiber amplifier and a distributed Raman amplifier. Their noise figure and net gain for the FBG<sub>P</sub> are 4.81 dB and 15.93 dB, respectively. In addition, the temperature calibration experiments show that a sampling rate of 51.43 MHz and the maximum temperature measurement error of 1.98°C are achieved within the temperature range of 20.3°C to 97°C. The stability of the net gain provided by the hybrid ADFT system is demonstrated by the coefficient of variation, which ranges from 2.22% to 2.95% in the peak voltage signal of the FBG<sub>P</sub>. This approach applies to scenarios requiring the handling of weak optical signals, particularly in temperature measurement at the micro-nano scale.

Optics ExpressVol. 32(21)
National Natural Science Foundation of China
Affordable and clean energy
Openalex Percentile: Top 87%
Advanced Fiber Optic Sensors
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.