Plasticized <scp>PVC</scp> composites comprising <scp>MWCNT</scp>‐<scp>RGO</scp> hybrid filler–the synergetic effect of hybrids on the dielectric and mechanical properties

Abstract Modification of polymers with hybrid fillers has sought much attention in the past few years. The addition of hybrid fillers will lead to a synergistic effect in reinforcing and is advantageous in polymer nanocomposites. One such attempt is presented here that explores the effect of incorporation of hybrid derived from reduced graphene oxide (RGO) and multiwalled carbon nanotubes (MWCNT) on the dielectric and mechanical properties of plasticized polyvinyl chloride (PPVC). This system of hybrid composite incorporating RGO‐CNT and PPVC has not been prepared and reported yet. Melt mixing techniques were effectively used for the fabrication of PPVC nanocomposites containing the hybrid filler in different ratios. The prepared composites showed enhanced dielectric strength in the lower frequency region up to 450 and high AC conductivity. The mutual stacking and penetration of the 1D‐2D nanomaterials lead to effective dispersion and enhancement in the electronic conduction. Among the hybrids, the R1C5 (with the filler ration RGO 1 wt% and CNT 5%) was having the optimum properties. The tensile modulus showed a cumulative variation with the addition of CNT. Even though the tensile strength decreased slightly because of the immobilization of the PPVC chains by the hybrid effect, the modulus value showed a marked increase of over 90% from the virgin polymer. The PPVC composite with R1C5 hybrid filler exhibited an EMI shielding efficiency of ⁓ 23 dB and it was frequency independent. The results suggest the composite R1C5 should be used as a cost‐effective material for applications in the L‐band and S‐band regions.