Iron-Modified Nano-TiO2: Comprehensive Characterization for Enhanced Photocatalytic Properties

This study investigates the effect of iron-modified nano-TiO2, using the co-precipitation method with different concentrations of FeCl3 (0.1, 1, and 10%), to improve its photocatalytic properties for outdoor applications. To this end, modified and unmodified nano-TiO2 were characterized using different techniques. The optical properties were characterized by diffuse reflectance spectroscopy (DRS) followed by band gap calculation. X-ray diffraction (XRD) was used to analyze the crystalline structure. Chemical and morphological characterization were carried out using energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM). The photocatalytic activity was investigated by decolorizing Rhodamine B aqueous solutions under similar sunlight irradiation. The results indicate that the modification improved light absorption in the UV range for all iron concentrations; however, only the concentration of TiO2: FeCl3 (10%) shifted the absorption to the visible region. Also, including Fe3⁺ in TiO2 decreased the band gap energy from 3.14 to up to 2.80 eV. There were variations in crystallite size from 21.13 to up to 40.07 nm. The nano-TiO2 morphology analysis showed that it did not change after iron modification. EDS showed an FeCl3 peak only at higher concentrations (10%). In addition, the 0.1% Fe-modified TiO2 exhibited the highest activity in the photocatalytic process, with an efficiency of 95.23% after 3 h of irradiation.