Effect of corrosion environments on the mechanical properties of friction stir welded aluminum alloy AA3003

The article presents an experimental study on the corrosion resistance of the 3003 Aluminium alloy Friction Stir Welded (FSW) joint in different working environments. Three types of corrosive media at different temperatures were tested to see how they affected the FSW joint mechanical properties. The media were sodium chloride, hydrogen chloride, and ethylene glycol. In parallel with the study of the effect of temperature, static tensile tests were carried out on specimens taken perpendicular to the welding direction. Also, micro-hardness profiles were used to determine the influence of the parameters studied on the various weld zones. Finally, the effect of the most aggressive corrosive medium, temperature, and the inclusion of ethylene glycol on the crack propagation resistance of an FSW joint were studied. Fatigue-propagation tests at constant stress amplitude were carried out to understand what affects the fatigue crack propagation of welded joints after corrosive attack. The results showed that uniform and pitting corrosion were combined to cause FSW joint surface degradation. Corrosion damage does not appear to alter yield strength and ultimate stress values. However, FSW joints show a significant degradation in mechanical properties with increasing temperature and with the aggressiveness of the corrosive medium. The inclusion of ethylene glycol was found to delay the rate of crack propagation during testing, leading to an improvement in the service life of pre-corroded FSW joints.