Soot volume fraction measurements in aero-engine model combustor outlet using two-color laser-induced incandescence

Quantitative measurement of Soot Volume Fraction (SVF) is an essential prerequisite for controlling soot particle emissions from aero-engine combustors. As an in-situ and non-intrusive optical diagnostic technique, Laser-Induced Incandescence (LII) has been increasingly applied for soot concentration quantification in various combustion environments such as laminar flame, vehicle exhaust, internal combustion chamber as well as aero-engine combustor. In this work, we experimentally measured the spatial and temporal distribution of SVF using two-color LII technique at the outlet of a single-sector dual-swirl aero-engine model combustor. The effect of inlet pressure and air preheat temperature on the SVF distribution was separately investigated within a pressure range of 241–425 kPa and a temperature range of 292–500 K. The results show that soot production increases with the inlet pressure but generally decreases with the air preheat temperature. Qualitative analysis was provided to explain the above results of parametric studies. The LII experiments were also conducted under 3 designed conditions to evaluate soot emission under practical operations. Particularly, weak soot emission was detected at the outlet under the idle condition. Our experimental results provide a valuable benchmark for evaluating soot emission in the exhaust plume of this aero-engine combustor during practical operations.