An overview of the constructions of conveyors for moving bulk materials, comparison and study of their parameters

The production of concrete mixes, along with their use in the production of building materials and structures, is one of the key processes in the construction industry during the construction, restoration and repair of buildings and structures. Because of this, the need to create modern concrete mixing plants that will meet the requirements of minimum energy consumption and maximum productivity of concrete mixture production is an urgent task. Not only the main operations, which include the dosing of the components of the mixture and their mixing, but also the maintenance operations, namely operations that ensure the timely movement of the components of the concrete mixture from warehouses to the main technological equipment, affect the set rhythm of the concrete mixture production. Conveyors of various types and designs are used to move bulk materials, such as crushed stone and sand. For the rational selection of such equipment in accordance with the characteristics of the cargo to be transported, knowledge of the types of conveyors, their structures and parameters, understanding of operation issues and methods of parameter calculation are required. In addition, it is worth paying attention to the following parameters: maximum cargo transportation productivity, low energy consumption per unit of moved products, low metal content of the structure. The work reviewed the most common designs of conveyors used to move bulk materials in concrete mixing plants, analyzed the disadvantages and advantages of conveyors, as well as technical parameters. As a result, the predominant directions for the use of belt and plate conveyors at construction enterprises were determined. The advantages of belt conveyors, which contribute to their widespread distribution, are high productivity, simplicity of design, reliability, quiet operation, low specific power consumption. When choosing a conveyor, it is recommended to choose the equipment with the highest productivity and the lowest power of the drive motors, however, the performance should be clearly related to other technological equipment.