Investigation of models for predicting the effectiveness of acid treatments in carbonate deposits

This article presents the results of an analysis of the available literature data on the acid treatment of carbonates based on the solution approach. The analysis of various acid treatment liquids, the choice of additives and modeling procedures was also carried out in order to optimally design the process of acid treatment of carbonates. Although theoretical models are designed to predict the effectiveness of acid treatments, their practical applicability for scaling at the field level remains uncertain. Scaling laboratory data to the optimal rate does not always lead to results corresponding to the usual values of processing at the field. In modern models, it is proposed to use the geometry of the pipe to calculate the dominant penetration of wormholes and take into account the competition between them, introducing the density of wormholes in a porous medium. However, assigning values that are sensitive to the rock structure and injection conditions is a major difficulty. Instead of predicting the length of dominant wormholes, it is preferable to focus on estimating the permeability resulting from acid injection. However, the permeability assessment is not possible without first calculating the dissolution coefficient. The simulation results demonstrate that the existence of various zones of recesses or cracks in the formation has a significant impact on the acidification process, especially on the direction of wormhole propagation. This direction can be partially controlled by adding deflecting or retarding agents.