Laser absorption correction for hydroxyl planar laser induced fluorescence measurements in a centrally staged combustor at elevated pressures

Planar laser-induced fluorescence (PLIF) is a crucial spectroscopic technique for measuring minor species [e.g., hydroxyl (OH), methylene (CH), and nitric oxide (NO) radicals] in combustion research, owing to its non-intrusive nature and high sensitivity. However, laser energy attenuation due to absorption poses significant challenges to its application under high-pressure conditions, which may cause asymmetric image intensity distribution along the light propagation direction. An absorption correction method for OH PLIF based on the concept of maximum number density is proposed in the present study. This method offers several key advantages, including simplicity, high accuracy, and versatility, allowing for correcting both time-averaged and instantaneous OH PLIF images. OH PLIF data obtained from a centrally staged combustor at elevated pressures (i.e., 0.3, 0.6, and 1.0 MPa) are utilized to validate the method. Correction for the time-averaged PLIF images achieves a much more symmetric distribution of OH, revealing the overall flame structures that would not have been completely visualized from the original images. The fronts of the pilot and main stage flames have also been recovered from the corrected instantaneous images. This correction algorithm provides an effective way of enhancing data quality for high-cost OH PLIF measurements at pressurized conditions.