STUDY OF STRESS WAVE PROPAGATION PATH AND DEPTH IDENTIFICATION IN CRACKED WOOD BASED ON ACOUSTIC EMISSION

The propagation velocity models were built using AE sensors to capture stress wave on pine specimen surface.On the different specimens, cracks were made in different numbers and the depth was gradually increased from 0 mm to 90 mm at 10 mm intervals. AE experiment was combined with COMSOL to investigate propagation path.The results show that R-squared is 0.996 when fitting tangent of angle to propagation velocity.At smaller crack depths, stress wave is diffracted around crack tip and then continues to propagate in to sensor along a straight line.However, as the crack depth increases, the reflected wave at the end face will arrive at the detection location faster with significantly weaker diffraction.The area with dimensions of20×10 mm was identified about the crack tip by crack identification method.