Structure-reactivity correlations for reactions between H/D atoms with selected ethers: Reaction-rate coefficients from direct shock-tube measurements and transition-state theory

Shock-tube experiments at elevated pressures between 2.0 and 2.7 bar were carried out to study H-atom abstractions between D atoms and selected ether compounds: dimethyl ether (DME), diethyl ether (DEE), dimethoxymethane (DMM), and methyl propyl ether (MPE). D-atom resonance absorption spectrometry (D-ARAS) behind reflected shock waves was used to monitor the consumption of D atoms. To study the bimolecular reactions between D atoms and the specific ether, gas mixtures of the selected ether compound and C 2 D 5 I diluted in argon (bath gas) were prepared; C 2 D 5 I was used as a precursor for D atoms. This innovative approach using Dual ARAS (D-ARAS and H-ARAS) allows the distinct detection of precursor decay followed by H-atom abstraction reactions and ether decay followed by H-atom release. For the study of the reaction D + DME → HD + products, the experiments covered a temperature range of 940–1050 K; for the reaction D + DEE → HD + products, the temperature range was 980–1260 K; for the reaction D + DMM → HD + products, the temperature range was 930–1300 K; and for the reaction D + MPE → HD + products, the temperature spans a range of 1000–1350 K. Experimentally determined rate coefficients have been expressed by the following Arrhenius equations: k total (D+DME) ( T ) = 1.9×10 −10 exp (−31.4 kJ/mol / RT ) cm 3 s −1 , k total (D+DEE) ( T ) = 1.7×10 −10 exp (−22.4 kJ/mol / RT ) cm 3 s −1 , k total (D+DMM) ( T ) = 2.7×10 −10 exp (−27.3 kJ/mol / RT ) cm 3 s −1 , and k total (D+MPE) ( T ) = 5.1×10 −10 exp (−31.5 kJ/mol / RT ) cm 3 s −1 . The experimental results show an uncertainty of ±30 % and were supplemented by transition-state theory (TST) calculations based on molecular properties and energies from computations at the G4 level of theory. TST computations were conducted for H-atom abstraction from various types of primary and secondary carbon bonds. Bond-specific reaction rate-coefficient expressions were derived from theory and compared with experimental results to establish correlations between molecular structure and reactivity.

Authors

Institutions

Publication Details

Journal
Combustion and Flame
Published
2024-09-19
DOI
https://doi.org/10.1016/j.combustflame.2024.113689
Citations
1
Primary Topic
Advanced Chemical Physics Studies
Type
article
Field-Weighted Citation Impact
0.34

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Structure-reactivity correlations for reactions between H/D atoms with selected ethers: Reaction-rate coefficients from direct shock-tube measurements and transition-state theory

Clemens Naumann, Uwe Riedel, Sebastian Peukert, Christof Schulz et al.
1 citations
Combustion and Flame
Advanced Chemical Physics Studies
0.34
article

Structure-reactivity correlations for reactions between H/D atoms with selected ethers: Reaction-rate coefficients from direct shock-tube measurements and transition-state theory

Clemens Naumann, Uwe Riedel, Sebastian Peukert, Christof Schulz, Torsten Methling, Marina Braun‐Unkhoff, F. Werner
article en
1 citations

Abstract

Shock-tube experiments at elevated pressures between 2.0 and 2.7 bar were carried out to study H-atom abstractions between D atoms and selected ether compounds: dimethyl ether (DME), diethyl ether (DEE), dimethoxymethane (DMM), and methyl propyl ether (MPE). D-atom resonance absorption spectrometry (D-ARAS) behind reflected shock waves was used to monitor the consumption of D atoms. To study the bimolecular reactions between D atoms and the specific ether, gas mixtures of the selected ether compound and C 2 D 5 I diluted in argon (bath gas) were prepared; C 2 D 5 I was used as a precursor for D atoms. This innovative approach using Dual ARAS (D-ARAS and H-ARAS) allows the distinct detection of precursor decay followed by H-atom abstraction reactions and ether decay followed by H-atom release. For the study of the reaction D + DME → HD + products, the experiments covered a temperature range of 940–1050 K; for the reaction D + DEE → HD + products, the temperature range was 980–1260 K; for the reaction D + DMM → HD + products, the temperature range was 930–1300 K; and for the reaction D + MPE → HD + products, the temperature spans a range of 1000–1350 K. Experimentally determined rate coefficients have been expressed by the following Arrhenius equations: k total (D+DME) ( T ) = 1.9×10 −10 exp (−31.4 kJ/mol / RT ) cm 3 s −1 , k total (D+DEE) ( T ) = 1.7×10 −10 exp (−22.4 kJ/mol / RT ) cm 3 s −1 , k total (D+DMM) ( T ) = 2.7×10 −10 exp (−27.3 kJ/mol / RT ) cm 3 s −1 , and k total (D+MPE) ( T ) = 5.1×10 −10 exp (−31.5 kJ/mol / RT ) cm 3 s −1 . The experimental results show an uncertainty of ±30 % and were supplemented by transition-state theory (TST) calculations based on molecular properties and energies from computations at the G4 level of theory. TST computations were conducted for H-atom abstraction from various types of primary and secondary carbon bonds. Bond-specific reaction rate-coefficient expressions were derived from theory and compared with experimental results to establish correlations between molecular structure and reactivity.

Combustion and FlameVol. 270
Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE), University of Duisburg-Essen (DE)
Deutsche Forschungsgemeinschaft
Openalex Percentile: Top 40%
Advanced Chemical Physics Studies
0.34
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.