Analysis of wastewater treatment plant data identifies the drivers of PFAS enrichment in foams

The concept of incorporating foam fractionation in aerated bioreactors at wastewater treatment plants (WWTPs) for the removal of per- and polyfluoroalkyl substances (PFAS) has recently been proposed. The extent of PFAS enrichment in aerated bioreactors' foams, as indicated by enrichment factors (EFs), has been observed to vary widely. Laboratory evidence has shown that factors affecting PFAS enrichment in foams include conductivity, surfactant concentrations and initial PFAS concentrations. However, real wastewaters are complex heterogenous matrices with physical, chemical and biological characteristics potentially contributing to the phenomenon of PFAS partitioning into foams. In this study, we characterised mixed liquor suspensions, including conductivity, filament content, aqueous PFAS concentrations, surface tension and total suspended solids concentrations (TSS) as well as foams, including bubble size and half-life. We used statistical tools - linear mixed-effects model - to establish relationships between PFAS enrichment in aerated bioreactor foams and the examined characteristics. We found that some of the examined characteristics, specifically filament content, surface tension and TSS concentrations measured in mixed liquor suspension and foam half-life, are negatively and significantly associated with the enrichment of longer chain PFAS (with perfluorinated carbon number ≥ 6). Of these, filament content is the important determinant of PFAS enrichment, potentially leading to an increase in, for example, perfluorooctanoic acid (PFOA) EF from 3 to 100 between typical filamentous and non-filamentous suspended biomass. However, enrichment of shorter chain PFAS (with perfluorinated carbon number ≤ 5) is negligible and is not affected by the characteristics that were measured. The findings of our study may serve as valuable information for the implementation of foam fractionation at WWTPs by elucidating the drivers that contribute to the enrichment of longer chain PFAS, under conditions typically found at WWTPs.

Authors

Institutions

Publication Details

Journal
Water Research
Published
2024-09-16
DOI
https://doi.org/10.1016/j.watres.2024.122397
Citations
14
Primary Topic
Per- and polyfluoroalkyl substances research
Type
article
Field-Weighted Citation Impact
3.50
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Analysis of wastewater treatment plant data identifies the drivers of PFAS enrichment in foams

Anthony D. Stickland, Bradley O. Clarke, Angel Chyi En We, Stefano Freguia
14 citations
Water Research
Per- and polyfluoroalkyl substances research
3.50
article

Analysis of wastewater treatment plant data identifies the drivers of PFAS enrichment in foams

Anthony D. Stickland, Bradley O. Clarke, Angel Chyi En We, Stefano Freguia
article en
14 citations

Abstract

The concept of incorporating foam fractionation in aerated bioreactors at wastewater treatment plants (WWTPs) for the removal of per- and polyfluoroalkyl substances (PFAS) has recently been proposed. The extent of PFAS enrichment in aerated bioreactors' foams, as indicated by enrichment factors (EFs), has been observed to vary widely. Laboratory evidence has shown that factors affecting PFAS enrichment in foams include conductivity, surfactant concentrations and initial PFAS concentrations. However, real wastewaters are complex heterogenous matrices with physical, chemical and biological characteristics potentially contributing to the phenomenon of PFAS partitioning into foams. In this study, we characterised mixed liquor suspensions, including conductivity, filament content, aqueous PFAS concentrations, surface tension and total suspended solids concentrations (TSS) as well as foams, including bubble size and half-life. We used statistical tools - linear mixed-effects model - to establish relationships between PFAS enrichment in aerated bioreactor foams and the examined characteristics. We found that some of the examined characteristics, specifically filament content, surface tension and TSS concentrations measured in mixed liquor suspension and foam half-life, are negatively and significantly associated with the enrichment of longer chain PFAS (with perfluorinated carbon number ≥ 6). Of these, filament content is the important determinant of PFAS enrichment, potentially leading to an increase in, for example, perfluorooctanoic acid (PFOA) EF from 3 to 100 between typical filamentous and non-filamentous suspended biomass. However, enrichment of shorter chain PFAS (with perfluorinated carbon number ≤ 5) is negligible and is not affected by the characteristics that were measured. The findings of our study may serve as valuable information for the implementation of foam fractionation at WWTPs by elucidating the drivers that contribute to the enrichment of longer chain PFAS, under conditions typically found at WWTPs.

Water ResearchVol. 266
The University of Melbourne (AU)
Clean water and sanitation
Openalex Percentile: Top 7%
Per- and polyfluoroalkyl substances research
3.50
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.