Distributed beamforming design for UAV‐based integrated communication and jamming systems

Abstract The integrated communication and jamming system is proposed by exploiting the diversity gain and flexible deployment of unmanned aerial vehicle (UAV)‐based distributed multiple input multiple output technology, which is expected to gain higher spectral efficiency and system scalability. This paper designs transmit beamforming of multiple UAVs so that they can simultaneously impose jamming signal to jamming targets and communication signal to communication users at the same frequency. The aim is to maximize the total jamming effect of all jamming targets while achieving a certain communication rate of communication users by optimizing the transmit beamforming matrices. Two cases are considered in which the UAV swarm works in clock synchronization and clock asynchronization. Specifically, the problem is formulated into a non‐convex optimization in the synchronous case. A near optimal solution is derived by decoupling the beamforming matrix into multi‐user interference suppression matrix and single‐user beamforming matrix. In the asynchronous case, the transmitter–receiver matching relation needs to consider and multiple optimization variables are highly coupled, penalty factors and intermediate variables to convert the optimization problem to convex programming are introduced. The simulation results show that the proposed beamforming design algorithm coordinates the communication and jamming signal rationally and outperforms the conventional beamforming design algorithms.